Description
Sensepeek PCBITE-4022 – 2x PCBite PCB holders
Two extra standard holders for your PCBite setup. Hold PCBs of any shape, or cables at board height, for soldering, inspection and measurement at the same 50 mm (1.97 in) working height as the holders in the PCBite kits.
Two standard PCBite PCB holders with the same magnetic base, knurled grip and pressure spring as the holders in the PCBite kits, at a working height of 50 mm (1.97 in). Position them anywhere on the base plate to hold a PCB of any shape or outline during soldering, inspection and measurement.
Each holder opens up to 8 mm (0.31 in) and is operated with one hand. Press the knurled sleeve down, slide in the PCB and release, and the pressure spring holds it firmly. The holders grip cables just as well as boards, so a cable can be held at exactly the same height as the PCB while you solder it in place, or two wires can be held end to end and soldered together.
An N52 neodymium magnet keeps each holder in place, while a wear-resistant bottom cap lets it slide smoothly across the base plate when you reposition it. Add the extra holders when a large PCB needs more support or when several boards share the same base plate.
The anodized aluminum body has a non-conductive surface, and the included yellow insulation washers separate the metal from the PCB traces, so powered boards can be held safely.
The 50 mm (1.97 in) height gives clearance for tall components and through-hole leads on the underside of the board. Standard holders can share the base plate with low profile holders at 20 mm (0.79 in), so different PCBs can be held at different heights in the same setup.
A PCBite base plate is required.
Included
- 2x PCB holder
- 1x Set of insulation washers
Specifications
- Working height: 50 mm (1.97 in)
- Jaw opening: up to 8 mm (0.31 in)
- Insulation washers: -40 to +120 °C
- Package: 150 × 100 × 30 mm, 100 g
4022
CHF 30.00
excl. VAT
Description
Sensepeek PCBITE-4022 – 2x PCBite PCB holders
Two extra standard holders for your PCBite setup. Hold PCBs of any shape, or cables at board height, for soldering, inspection and measurement at the same 50 mm (1.97 in) working height as the holders in the PCBite kits.
Two standard PCBite PCB holders with the same magnetic base, knurled grip and pressure spring as the holders in the PCBite kits, at a working height of 50 mm (1.97 in). Position them anywhere on the base plate to hold a PCB of any shape or outline during soldering, inspection and measurement.
Each holder opens up to 8 mm (0.31 in) and is operated with one hand. Press the knurled sleeve down, slide in the PCB and release, and the pressure spring holds it firmly. The holders grip cables just as well as boards, so a cable can be held at exactly the same height as the PCB while you solder it in place, or two wires can be held end to end and soldered together.
An N52 neodymium magnet keeps each holder in place, while a wear-resistant bottom cap lets it slide smoothly across the base plate when you reposition it. Add the extra holders when a large PCB needs more support or when several boards share the same base plate.
The anodized aluminum body has a non-conductive surface, and the included yellow insulation washers separate the metal from the PCB traces, so powered boards can be held safely.
The 50 mm (1.97 in) height gives clearance for tall components and through-hole leads on the underside of the board. Standard holders can share the base plate with low profile holders at 20 mm (0.79 in), so different PCBs can be held at different heights in the same setup.
A PCBite base plate is required.
Included
Specifications
Additional information
PCB Holder
PCBite Base Plates
Available Technical Documents
Related Products
4021
CHF 59.00excl. VAT
Insulated 297 × 420 mm (11.69 × 16.54 in, A3) base plate in solid stainless steel, the largest in the PCBite line. Pre-fitted insulation cover for powered PCBs.
6019
CHF 279.00excl. VAT
Four standard holders on a large insulated base plate, two SQ200 200 MHz handsfree oscilloscope probes and four SQ10 handsfree probes with test wires, for soldering, inspection and handsfree measurement. Insulated design for safer probing on powered PCBs.
4020
CHF 59.00excl. VAT
3× magnifier with an edgeless, anti-reflection coated lens and a magnetic base for any PCBite base plate. Tilt and rotation hold their position without set screws.