Description
Sensepeek PCBITE-6003 – PCBite kit with 4x SQ10 probes and test wires
The largest PCBite kit with an insulated base plate, holders and four handsfree SQ10 probes. The base plate gives you room for large PCBs, several connected boards or a complete handsfree probing setup. Position each probe on the signals you need and monitor them with your logic analyzer, multimeter or debug adapter while keeping both hands free. The insulated body and low center of gravity add safety and stability.
Place the spring-loaded needle on any test point in the signal path and release. The flexible arm holds the needle in position, while the N52 neodymium magnet in the base keeps the probe locked to the base plate. No soldered wires and no fixtures.
Every PCBite holder uses the same magnetic base, knurled grip and pressure spring, with a standard working height of 50 mm (1.97 in). Each holder includes insulation washers for holding powered PCBs.
A low center of gravity keeps the probe stable and helps maintain consistent contact throughout the measurement.
Color coded test wires with 2.54 mm (0.100 in) jumper connectors are included together with cable holders in four of the eight available colors. They connect directly to logic analyzers, multimeters, mixed signal oscilloscopes and debug adapters. Red and black test leads with 4 mm banana plugs connect directly to multimeters, bench power supplies and other instruments with standard 4 mm inputs.
Designed for DC to 10 MHz measurements and well suited for I2C, I3C, UART, CAN bus and other digital signals.
Included
- 1x Insulated base plate, large
- 4x PCB holder
- 4x SQ10 probe with spring tipped test needle (black)
- 4x SQ probe holder for handsfree measurement
- 2x Banana to Dupont test lead (red, black)
- 5x Dupont test lead 80 cm (31 in), 5 colors
- 4x Extra test needle (SP/SQ)
- 1x Set of cable holders (red, yellow, green, blue)
- 1x Micro fiber cloth (to polish the mirror side of base plate)
- 1x Set of insulation washers
Specifications
- Measurement range: DC to 10 MHz
- Current: up to 2 A continuous
- Needle resistance: below 0.02
- Working height: 50 mm (1.97 in)
- Test lead length: 80 cm (31 in)
- Package: 310 × 215 × 27 mm, 920 g
6003
CHF 138.35
excl. VAT
Description
Sensepeek PCBITE-6003 – PCBite kit with 4x SQ10 probes and test wires
The largest PCBite kit with an insulated base plate, holders and four handsfree SQ10 probes. The base plate gives you room for large PCBs, several connected boards or a complete handsfree probing setup. Position each probe on the signals you need and monitor them with your logic analyzer, multimeter or debug adapter while keeping both hands free. The insulated body and low center of gravity add safety and stability.
Place the spring-loaded needle on any test point in the signal path and release. The flexible arm holds the needle in position, while the N52 neodymium magnet in the base keeps the probe locked to the base plate. No soldered wires and no fixtures.
Every PCBite holder uses the same magnetic base, knurled grip and pressure spring, with a standard working height of 50 mm (1.97 in). Each holder includes insulation washers for holding powered PCBs.
A low center of gravity keeps the probe stable and helps maintain consistent contact throughout the measurement.
Color coded test wires with 2.54 mm (0.100 in) jumper connectors are included together with cable holders in four of the eight available colors. They connect directly to logic analyzers, multimeters, mixed signal oscilloscopes and debug adapters. Red and black test leads with 4 mm banana plugs connect directly to multimeters, bench power supplies and other instruments with standard 4 mm inputs.
Designed for DC to 10 MHz measurements and well suited for I2C, I3C, UART, CAN bus and other digital signals.
Included
Specifications
Additional information
Handsfree DMM / Logic Probe Kit
10
Debug Adapters, Logic Analyzers, Multimeters
Insulated Handsfree Probing
Available Technical Documents
Related Products
4005
CHF 69.00excl. VAT
Four SP10 handsfree probes with test wires add four measurement points to your existing PCBite setup.
6019
CHF 279.00excl. VAT
Four standard holders on a large insulated base plate, two SQ200 200 MHz handsfree oscilloscope probes and four SQ10 handsfree probes with test wires, for soldering, inspection and handsfree measurement. Insulated design for safer probing on powered PCBs.
GPT-12002
CHF 1'557.90excl. VAT
50 Hz / 60 Hz, Hi-pot, AC/DC Withstand, 5kVAC / 6kVDC, 200 VA, 7" Color TFT, RS232, USB, 0.01%